Skip to main content

Old-School, Upper-Body Specialization Workouts

Old-School Training Programs and Workout Routines for Upper Body Specialization


     When it comes to building a prodigious amount of total body muscle mass, bulk, and power, you definitely need to prioritize lower body and back training.  You won’t build massive mounds of muscle without focusing on hard and heavy—not to mention voluminous—squat and “pull” training, such as deadlifts and the quick lifts.  It’s a necessity.  But I also understand that what most lifters want is an impressive upper body replete with full, round pectorals, wide lats and shoulders, and big, bulging arms, both biceps and triceps.  Sometimes it’s good to spend a period of time, therefore, specializing on exactly that goal.

     In my recent article Some Secrets to Getting Big and Strong, I wrote that one of the “secrets” is to spend part of the training year doing moderate or “easy” workouts and another part utilizing really hard, higher-volume training.  The moderate training should comprise about ⅔ of your training whereas the ultra-intense stuff should only comprise about ⅓ of it.  Another approach you can take, however, is to not train your entire body—whether you’re using full-body workouts or training splits doesn’t matter—with either “moderate” or “hard” cycles but to train some muscles “easy” while doing hard, specialization workouts on others.  So, you might spend a training cycle doing a high-volume, 20-rep squat and deadlift workout while training all of your upper body with “easy strength” or “everything moderate” methods.  Conversely, you can do the opposite.  After a period of that kind of training, you can “take it easy” on the squats and pulls while specializing on your upper body.

     You can also rotate between training cycles where you train ⅔ of your body with “moderate” sessions and the other ⅓ with high-intensity and/or high-volume workouts.  So, you might do a high-volume arm cycle for 8 weeks, chest and lats for another 8 weeks, quads and hamstrings in the following 8 weeks, and then finish off with an 8-week blitz of shoulder and calves-focused training.  Or anything else of a similar nature.

     In this article, I’ll present some upper body specialization programs that are good for 6 to 8 weeks of focused, intense, high-volume training.  These are largely inspired by the training of our old-school predecessors, the classic bodybuilders from the so-called silver and golden eras of bodybuilding’s yesteryear.  In my mind, those were the “glory days” of bodybuilding past.  The decades from roughly the 1950s to the ‘80s produced some of the best physiques the bodybuilding world has ever seen.  I believe, as well, that their training methods are, in many ways, better than what the modern bodybuilder generally does.  They built their bodies by starting with full-body workouts and three days a week of training.  They trained that way until they could handle a lot of volume and some really high workloads in their training routines.  Then, once their workouts were becoming too long, they switched over to two-way split workouts, still training each muscle group 3 days a week, but training a total of 6 days weekly.  That approach, in my book, is still what the natural bodybuilder should do.  Although steroids were most definitely used during those eras, the amount was much, much lower than the high dosages that bodybuilders began using in the ‘90s, and then increased over the past few decades.  When you take really high dosages of anabolics, you will probably get the best results by training with high-volume, high-intensity, but low frequency workouts.  The natural bodybuilder, however, should go the way of the old-school bodybuilder.

     Old-school bodybuilders understood the necessity of rotating between periods of moderate and period of hard training.  Once they became advanced bodybuilders, this is exactly the approach used by the iron legends of yore.

     All of the following workouts are to be used after you’ve taken a break from high-volume upper body training.  Don’t just jump right into one of these if you’ve spent the past 8 to 12 weeks “bombing” and “blasting” lots of bench presses, pulldowns, curls, or whatever it is that modern lifters do for their upper bodies in today’s gyms.  If, however, you have spent the past couple of months doing either lower-body specialization training or training with “basic” 3-days-per-week, full-body workouts or any kind of “easy strength” routine—or anything else of a similar nature—then you’re ready for the following programs.

Basic Full-Body Program with Upper Body Emphasis

     This is the kind of program that a lot of old-school bodybuilders utilized when they first wanted to focus on upper body specialization but not yet go to a split routine.

     I have listed the following days as Monday, Wednesday, and Friday, but you can train on any 3 non-consecutive days that you wish.  I listed M,W,F because, from what I’ve observed, that’s typically the training days preferred by most lifters.  When I competed in powerlifting and followed Bill Starr’s H/L/M system, I liked to train on Sundays, Tuesdays, and Thursdays.  Sunday was perfect, in my mind, for starting the training week.  It made whatever “life” threw at me starting on Monday morning a breeze.  And after my final training day on Thursday, I enjoyed having Friday and Saturday off.  Anyway, substitute for other days if you wish.

Monday, Wednesday, and Friday:

Squats: 5x5.  Despite the fact that this is an upper body specialization routine, you still need to do something for your legs, and nothing beats the good ol’ barbell back squat when it comes to packing on size on the whole of the body, upper body muscles included.  These are 5 straight sets, so make sure you do 2 to 3 progressively heavier sets before commencing with your 5x5 workout.  On all 5 sets, use a weight that is around 90% of your 5-rep max.  Stick with that weight at each workout until all 5x5 sets feel easy and then add weight at the next workout.  Use this method for all of the remaining lifts.

Bench presses: 5x5

Weighted chins: 5x5

Incline bench presses: 5x5

One-arm dumbbell rows: 5x5 (each arm)

Military presses: 5x5

Barbell curls: 5x5

Skull crushers: 5x5

Alternate dumbbell curls: 5x5 (each arm)

Close-grip dips: 5x5

High-Volume 3-Days-a-Week Routine

     This is another 3-day program, but here you will utilize a 2-way split and two different upper body workouts. Now, we're also getting into the more advanced stuff.

Monday: Upper Body Workout #1

Bench Presses: 5x5, 5x10.  After a couple to a few warmup sets, load the bar with a weight that you would utilize if you were doing one hard, all-out set of 7 reps to complete muscular failure.  Now, attempt 5 sets of 5 reps with that weight.  At your first session, for instance, you might manage 3 sets of 5 reps and 2 sets of 4 reps, perhaps just 3 reps on the last set, or whatever.  Stick with that weight at each session until you do get 5 reps on all 5 sets.  Once you’re finished with your 5 sets, reduce weight to around your 15-rep max—keep in mind that you’ll be fatigued from the 5x5—and attempt 5 sets of 10 reps with that weight.  Again, stick with this weight at each subsequent workout until you manage 10 reps on all 5 sets.

Bent-over barbell rows: 5x5, 5x10.  Same method as the bench presses.

Behind-the-neck presses: 8x8.  For this movement, use a weight that is roughly your 15 to 16 rep maximum.  Attempt 8 sets of 8 reps with that weight.  As with the previous movements, increase weight whenever you manage 8 reps on all 8 sets.

Barbell curls: 8x8. Same as the b-t-n presses.

Skull crushers: 8x8.  Same as previous movements.

Wednesday: Lower Body Workout

Squats: 5x5.  When training on an upper body specialization program, you don’t want to completely neglect your lower body.  You just want to ensure that your recovery capabilities and your nervous system is primed for the upper body workouts.  For that reason, use a weight on all 5 sets of 5 reps here with a weight you would do for 10 reps if you were doing one all-out set.  Only add weight to this movement once all 5 sets feel easy.

Romanian deadlifts: 5x5.  Same method as the squats.

Steep incline weighted sit-ups: 2-3x10-12.  To finish off your lower body day, do some abdominal work.  This will help to keep your lower back and midsection strong during the program.

Friday: Upper Body Workout #2

Superset:

   Incline barbell bench presses: 4x10-12

   Flat dumbbell bench presses: 4x10-12.  After a couple to a few warmup sets, perform 4 supersets of both movements using a weight on both lifts that you would use for about 15 reps if you were doing one all-out set.  Take minimal rest between each superset, as well, no more than 60 seconds.  The key to this upper body workout is to get a massive pump when all is said and done.  Follow the method on this superset for all of the movements during the workout.

Superset:

   Wide-grip dips: 4x10-12

   Incline dumbbell flyes: 4x10-12

Superset:

   Wide-grip lat pulldowns: 4x10-12

   Close-grip seated cable rows: 4x10-12

Superset:

   Bent-over barbell rows: 4x10-12

   Crossbench dumbbell pullovers: 4x10-12

Superset:

   Seated behind-the-neck presses: 4x10-12

   Standing overhead dumbbell presses: 4x10-12

Superset:

   Barbell curls: 4x10-12

   Cable curls: 4x10-12

Superset:

   Skull crushers: 4x10-12

   Rope pushdowns: 4x10-12

Superset:

   Seated dumbbell curls: 4x10-12

   Lying dumbbell triceps extensions: 4x10-12

The High-Volume, High-Frequency Routine

Monday, Wednesday, and Friday:

Bench presses: 8x8.  Use a weight on all sets that you would use if you were attempting one all-out set of 15 to 16 reps—same goes for all of the movements on this day.

Wide-grip chins or lat pulldowns: 8x8

Behind-the-neck presses: 8x8

Barbell curls: 8x8

Straight bar triceps pushdowns: 8x8

Tuesday and Saturday:

Squats: 5x8

Stiff-legged deadlifts: 5x8.  Use a weight on both movements that you would use if you were doing one all-out set of 12 reps.  You should get all of your sets with relative ease.  The key with this program is to conserve all of your energy for the upper body workouts while still preserving your lower body muscle.

     You can also add some calf work to the lower body days and an abdominal movement to either of the training days, depending on how frequently you want to train your abs.

     At the upper body workouts, you should have a solid pump after each workout, but not one that is so “intense” that the workout can’t be repeated with such frequency.  On the Wednesday workout, if needed, you can reduce the weight used slightly from the Monday and Friday sessions.  You may need to do this the first couple weeks of the program, and then use the same weight at each training session after that.

     Don’t force adding more weight to each of your lifts.  Stick with the same weight on a movement until you feel as if all 8 sets are “easy” and then add weight to that lift.  This program works through the relatively high-volume and the high-frequency.  Let the volume and the frequency of the training promote upper body muscle growth rather than attempting to continually increase the resistance used.

High-Volume Upper Body Split Program

     For this one, instead of training the entirety of your upper body in one session, you’ll split it into two workouts, training chest and back at one and shoulders and arms at the 2nd, with one workout per week devoted to leg training.  This allows you to directly work each upper body muscle twice weekly while indirectly working each muscle 4 times, since your shoulders and triceps, for instance, will be indirectly worked during the chest session and your chest indirectly worked during the shoulder and triceps movements.  Same thing goes for the back and biceps.  This is a fairly advanced routine, so make sure that you have the work capacity to handle it!

     Each of the sets listed in these workouts are straight sets performed with the same weight.  Use a weight on each 5x5 lift that is approximately 90% of your 5-rep maximum, and each 5x8 movement should be done with 90% of your 8-rep max.  Once you manage all 5 or 8 reps on all 5 sets on any lift for two workouts straight, add weight at the next session.

Monday and Thursday: Chest and Back

Bench presses: 5x5

Wide-grip weighted chins: 5x5

Incline dumbbell bench presses: 5x8

Bent-over barbell rows: 5x8

Cross-bench dumbbell pullovers: 5x8

Tuesday and Friday: Shoulders and Arms

Seated behind-the-neck presses: 5x5

One-arm dumbbell overhead presses: 5x8

Barbell curls: 5x5

Close-grip weighted dips: 5x5

Cable curls: 5x8

Rope pushdowns: 5x8

Wednesday: Legs

Squats: 5x5

Romanian or stiff-legged deadlifts: 5x5

Standing calf raises (barbell or dumbbells): 4x15-20

     If you’re looking for more upper body size, give one or all of these workouts a try.  Just don’t attempt them back-to-back.  You might spend 6 to 8 weeks on one of them, and then another 6 to 8 weeks on either a lower-body specialization routine or any program that is more “well rounded” than these.  After that, you can then try another one for a 6-to-8-week training cycle.  I don’t think you should run any of these for longer than 8 weeks, though you might be able to stick with one for 12 weeks, assuming you’re still making progress at the 8-week mark.


     If you want more old-school bodybuilding information and workout routines, then be sure to click on my “Classic Bodybuilding Articles and Essays” page on the sidebar.  You can also read my series on the training of the Golden Era Legends that I started back in June.  In addition, be on the lookout for my upcoming book—currently titled The Big Book of Old-School Bodybuilding Methods: Learn the Mass-Building Secrets of the World’s Greatest Bodybuilding Legends.  I had originally intended on having it ready for my publisher about 6 months ago, but several factors—which I won’t get into here—prevented me from being able to do so.  However, it ended up being a “blessing in disguise” since I have now written multiple additional chapters for it.  It should be ready for publication by the end of the year.  In the meantime, be sure to check out all of MY BOOKS that I do have available at the moment.  Click on the link for details on each one of them.

     As always, if you have any comments or questions, leave them in the “comments” section below.  You can also send me an email if you prefer private correspondence.  I’m a little behind answering some of my emails at the moment, though I typically get around to answering them every couple days or so.  If you have sent me an email already, and it has been longer than a week, please feel free to re-send it.  With all the emails that I get, some of them do “slip through the cracks” so to speak.


Comments

Popular posts from this blog

The Deadlift Ultimate

AKA: The Last Deadlift Training Article You EVER Need to Read! Tips, Techniques, Tricks, Workout Routines, and Training Suggestions for Building Incredible Deadlift Strength and Power      Okay, maybe my “also known as” title here is a little, you know, over the top.  But as I sit here at my laptop, tapping away at these keys, my goal is (or at least make a valiant effort) to write the end-all, be-all article for building a monstrously strong and powerful deadlift.  I have the deadlift on my mind after penning my last few articles—a few on Anthony Ditillo’s training methods, another on a 3-day Russian training program, and my recent essay on an overview of Russian methods—because here’s the lowdown for the deadlift: while I love Ditillo’s training methods and Russian workout plans overall, I don’t necessarily think any of those methods are the best when it comes to the deadlift.  If you want to get really big and strong, plus build up your squat...

Ditillo’s Big Three for Bulk and Power

More Anthony Ditillo Training Wisdom for Developing Size and Strength      My recent essay on the training methods of the great bodybuilding writer Anthony Ditillo has proven quite popular, more so than I thought it would be when I posted it.  When I wrote it, I knowingly left out a few of his training routines due to length constraints.  I was afraid it was a bit too long as is when I finished it, since my shorter articles tend to get the most views.  Besides, I figured I could always write more down the road, though “down the road,” in this case didn’t prove to be very long.      Ditillo was a huge proponent of using the “big,” basic barbell movements—squats, overhead presses, bench presses, bent-over rows, deadlifts, barbell curls, and the like.  But in one of his many articles for Ironman , he wrote that there were three movements in particular that were all you needed to, in his words, “build great massiveness a...

Bill Starr’s High-Volume, High-Frequency Training

Some Thoughts on High-Volume, High-Frequency Training, Bodyweight Workouts, Program Design, and Progressive Resistance      Bill Starr is primarily known for his 5x5 training and his heavy-light-medium system of strength training.  Most of the articles that I write here on Starr revolve around those methods, as well, including an entire book I wrote on his methodology, The Strongest Shall Always Survive: Lifting Lessons from an Iron Legend .  Starr was a one-time world-class Olympic weightlifter and a world-renowned strength coach.  When it came to the athletes that he trained, it was all about increasing their strength and performance.  But he also wrote a lot of articles for the major bodybuilding rags that ruled the magazine rack during his lifetime.  When I was young, for instance, I knew of him only because of his many articles in Ironman magazine and MuscleMag International .  Starr was well aware that most of those readers ...