Skip to main content

Thursday Throwback: BULK!

 For this week's "Thursday Throwback," I have chosen an article of mine that I wrote for IronMan sometime in the '90s.  This article may be "old" but it proves that good, solid, heavy training—the kind that produces bulk—never changes.


Matthew Sloan is seen here after going on a "bulking" program such as the ones in this article.
Bulk

Forget about isolation exercises, ultra-high reps, machines and the like. For bulk-building you absolutely must use the compound movements for a limited number of sets. That means heavy bench presses, squats, deadlifts, barbell curls, rows, push presses, cleans and shrugs. Another factor you must pay attention to is recuperation. The following workouts all have those two things in common – heavy compound lifts and plenty of recuperation time. Use each for at least a month before switching to another, and six to eight weeks per routine may be even better.

TWO DAYS A WEEK PROGRAM
This routine’s great if you’re just starting out or if you’ve been doing multiple workouts per week for a long time. Don’t worry about the infrequent training. Perform if correctly and you won’t want to work out more often.

Monday

1.) Deadlift – 5 sets of 3 reps.

Make these triples progressively heavier, with the first three sets being warmups and the last two being your only REAL work sets. On the final set it should be next to impossible to get out the three reps.

2.) Bench Press – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on your three work sets, adding weight when you can get five reps on all three sets.

3.) Wide Grip Chins – 5 sets of 5 reps.

Same as benches.

4.) Bench Press Lockouts – 5 sets of 3 reps.

Make these triples progressively heavier, with the first three being warmups.


Thursday

1.) Squat – 5 sets of 5 reps.

Squats are the best single exercise for adding bulk, with deadlifts a close second. Perform the first two sets as warmups and go HEAVY on your three work sets., using the same weight on all three and adding weight when you can get five reps on all three sets.

2.) Clean and Press – 5 sets of 3 reps.

Use either a barbell or dumbells, and make these triples progressively heavier. The first three sets are warmups.

3.) Barbell Curls – 5 sets of 3 reps.

Same as the clean and press.


ONE BODYPART PER DAY ROUTINE

For those who insist on working out every day, this is the routine for you. The key is to train only one muscle group at each session and train the smaller muscle groups on the days after you train the larger ones.

Monday – Chest

1.) Bottom-position Bench Press – 5 singles.

Perform these single reps in the power rack, starting the exercise from the chest. Increase the weight on each successive set.

2.) Incline Press – 5 sets of 5 reps.

Perform the first two sets as warmups and go heavy on your three work sets, using the same weight on all three and adding weight when all you can get 5 reps for all three sets.

3.) Dumbell Incline Bench Press – 2 sets of 8 reps.

No warmups here. Go straight to two very hard sets and use the same weight on both. Don’t take it easy because you’re fatigued.


Tuesday – Arms

1.) Barbell Curl – 5 singles.

Most people aren’t used to such heavy arm training, but it’s underrated. Work these singles hard, and don’t worry about high reps being more effective for building big biceps. They aren’t. Increase the weight on each successive set.

2.) Lying Barbell Extension – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on all three work sets, adding weight when you can get five reps on all three.


Wednesday – Legs



1.) Squat – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on all three work sets, adding weight when you can get five reps on all three.

2.) Squat Lockout – 5 sets of 3 reps.

Make these triples progressively heavier, with the first three sets being warmups.

3.) Stiff-legged Deadlift – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on all three work sets, adding weight when you can get five reps on all three sets.


Thursday – Shoulders

1.) Push Press – 5 singles.

Increase the weight on each successive set.

2.) Behind the Neck Press – 5 sets of 6 reps.

Use strict form on these. The first two sets are warmups, then use the same weight on all three work sets.



Friday – Back

1.) Rack Pull (deadlift lockout) – 5 sets of 3 reps.

Make these triples progressively heavier, with the first three sets being warmups.

2.) Stiff-legged Deadlift – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on all three work sets, adding weight when you can get five reps on all three sets.

3.) Wide-grip Chin – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on all three work sets, adding weight when you can get five reps on all three sets.

4.) Bentover Row – 5 sets of 5 reps.

Perform the first two sets as warmups and use the same weight on all three work sets, adding weight when you can get five reps on all three sets.


Make sure you get plenty of rest over the weekend because you’ll need it as the weights go higher. Also, if you’re new to such ultra-heavy training, take it easy for a week or so until and allow your body to adjust to the triples and singles. If you don’t, you’ll be so sore after the first workout with singles that you won’t be able to lift for two or three days.



10-SETS METHOD

Here’s a great old-time routine for building strength and bulk that you don’t see people using much anymore, despite the fact that quite a few lifting writers have been advocating it again in recent years. Pick one exercise in each session and do 10 sets of 3 to 5 reps. Whatever rep range you use, choose a weight you can get the reps with on each and every set. If you decide to do 10 sets of 3, choose a weight you can usually get six hard reps with; if you’re doing 5’s, choose a weight you’d use for 10 hard reps. Take only a minute of rest between sets. Here’s a sample week’s workout for the 10-sets method.



Monday

1.) Deadlift – 10 sets of 3 to 5 reps.

2.) Wide-grip Chin – 3 sets of 5 reps.

3.) Barbell Curl – 5 sets of 5 reps.


Wednesday

1.) Bench Press – 10 sets of 3 to 5 reps.

2.) Overhead Press – 5 sets of 3 reps

Increase the weight on each successive set.

3.) Plate Front Raise – 3 sets of 8 reps.


Friday

1.) Squat – 10 sets of 3 to 5 reps.

If you work as hard as you’re supposed to, you won’t need any other exercise. Remember, 1 minute rests between sets on the 10 set exercises.



EAT HEAVY TO LIFT HEAVY

Beginning Old School Diet:

Meal 1.) – 2 eggs/2 slices toast/bowl of oatmeal/glass of milk.

2.) Slice of cheese/glass of milk.

3.) ¼ lb. hamburger/baked potato/glass of milk.

4.) 2 eggs/glass of milk.

5.) 12 oz. steak or chicken/baked potato/slice of bread/2 glasses of milk.

6.) banana/2 glasses of milk.

Once your system can tolerate this amount of food, begin adding progressively to each meal. For example, add an egg, bacon or a slice of toast here, and a glass of milk or another baked potato there. Think progressive, no different than adding weight to your work sets. Follow these routines for a minimum one month each. By increasing food intake along with your top end weights you should see good results at the end of three months.

Comments

Popular posts from this blog

Overtraining

Some Thoughts on Understanding and Avoiding Overtraining      When it comes to the state commonly referred to as “overtraining,” opinions vary. They run quite the gamut, too.  Some lifters are so bold as to declare “no such thing as overtraining exists.”  On the polar opposite, flip side of that you have the typical “hardgainer” advice that more than just two workouts—hell, maybe more than just one hard session—per week will lead to “OVERTRAINING.”  For some reason, the latter group typically capitalizes “overtraining.”  I guess that’s to show the rest of us overtrainers just how scary of a subject it can be.  The truth, of course, and you may have already surmised this, lies somewhere in between those two extremes.      There are three areas , I believe, in which overtraining occurs.  They overlap but are still particular enough that they each deserve their own mention.  You can overtrain your movemen...

The High-Protein, High-Set Program

  A.K.A. - How to Gain 40 Pounds of Bulk in 8 Weeks John McCallum’s High-Frequency, High-Volume Routine for Rapid Mass Gains      In the 1960s, John McCallum wrote arguably the greatest monthly column the bodybuilding world has ever known.  It was called “The Keys to Progress” and appeared in what was probably also the greatest muscle magazine of all time, Strength and Health .  His column is still fantastic to this day.  To be honest, it’s probably better today because of all the nonsense that you see, hear, or read about in the ultra-saturated world we all know and love called the internet.  I wonder what the hell McCallum would think about training and nutrition information these days?  I have a feeling he wouldn’t think highly of it at all.      I thought about McCallum this morning when I was “thumbing” through my new digital copy of “The Complete Keys to Progress.”  I have an older, slightly tatt...

The Top 10 Posts of 2024!

Now that 2024 is behind us, I thought I would do a "Top 10" post for the start of 2025.  Many of you may be knee-deep at the moment in trying to achieve some of your New Year's resolutions - assuming you haven't quit already😏.  Well, if getting big and/or strong  is at the top of your list of resolutions, perhaps some of the following essays and articles from last year might help. The following were the top 10  most read  posts from 2024: The Look of Power Size AND Strength: The Best Way to Train for Both Easy Muscle Classic Bodybuilding: How to Gain 50 Pounds of Muscle, Part One (and if you find Part One interesting, make sure you check out Parts Two and Three ) Long, Hard, or Frequent Training The High-Frequency Training Manifesto Old-School, Full-Body Mass Building Power Bodybuilding The Full-Body Big Barbell 5 Program And the #1 most read post... Marvin Eder's Mass-Building Methods