Skip to main content

3 to 5 Split Training

Various Split Training Options With the 3 to 5 Method for Mass, Strength, and Power


     When it comes to serious strength and power training, one of the best ways to train is with the sub-maximal effort method, also known as “grease the groove” training, or to be nerdy about it, synaptic facilitation.  One of the simplest, easiest, and not to mention result-producing means to go about this is with the 3 to 5 method.

     The 3 to 5 method is generally used with full-body workouts.  When I’ve written about it in the past, that’s the way that I’ve suggested doing it.  Here's how the 3 to 5 method works: Using big, compound, free-weight movements, you train 3 to 5 days each week.  You use 3 to 5 lifts at each session.  For each lift, you train with 3 to 5 sets.  On each set, you do 3 to 5 reps.  To top it off, you rest 3 to 5 minutes between each set.

     It’s a great way to easily use the “Russian rules” of training.  Popularized by Pavel Tsatsouline (who also popularized the 3 to 5 method), if you’re unfamiliar with the rules, they are these:

1. You must lift heavy.

2. You must limit your reps to five.

3. You must avoid muscular failure.

4. You must cycle your loads.

5. You must stay tight.  Tension is power.

6. You must treat your strength as a skill and "practice" with iron rather than a “workout”.

7. You must strive to do fewer things better.

     Using the 3 to 5 method in its conventional form, a week of training might look something such as this:

Monday:

Squats: 3x5

Deadlifts: 5x3

Bench presses: 3x5

Barbell curls: 3x5

Wednesday:

Front squats: 3x5

One-arm dumbbell overhead presses: 5x3 (each arm)

Power snatches: 5x3

Friday:

Squats: 5x3

Power cleans: 5x3

Weighted dips: 3x5

Weighted chins: 5x3

Stiff-legged deadlifts: 5x3

Saturday:

Overhead squats: 3x3

Military presses: 3x5

Alternate dumbbell curls: 3x5 (each arm)

Board presses: 3x3

     That’s just an example.  But it’s a good workout.  You can’t go wrong with it.  If you need some strength and power, not to mention a little bit of muscle size, it would produce just those things.  Not bad for a fighter or an athlete, either, though you might want to cut it down to just 3 days if you’re doing a lot of other athletic activities outside of the gym.  If you’re more or less a couch potato when you’re not in the gym, then increase the workouts to 5 per week—most of the weeks, at least—and you should make good gains.

     What if you want to train with a split system, whether it’s a 2-way, 3-way, or, heck, a one-bodypart-per-workout routine?  Well, I think it would be great for that, as well.  In fact, using the 3 to 5 rule would be good no matter the workout.  It’s a good way to program your training without giving a whole lot of thought to it.  Follow the method and it will work no matter the split.  Let’s look at some different example workouts for how you might go about doing this.

Upper/Lower Split

     Here’s an example way that you might use it for a week of training with an upper/lower split routine.

Monday - Upper Body

Bench presses: 5x3

Inline barbell bench presses: 3x5

Military presses: 3x5

Weighted chins: 5x3

Barbell curls: 3x5

Tuesday - Lower Body

Front squats: 5x5

Back squats: 3x5

Stiff-legged deadlifts: 3x5

Wednesday - Upper Body

Weighted dips: 5x3

One-arm dumbbell overhead presses: 5x3 (each arm)

Barbell rows: 3x5

Friday - Lower Body

Sumo deficit deadlifts: 5x3

Full cleans: 5x3 (drop into a front squat as you clean each rep)

Thick-bar dumbbell deadlifts: 5x3

Saturday - Upper Body

Dumbbell bench presses: 3x5

Weighted chins: 3x5

Behind-the-neck presses: 3x5

Barbell curls: 5x3

     On the following week, train your lower body on Monday, Wednesday, and Saturday and your upper body on Tuesday and Friday, rotating back and forth in this manner from week-to-week.

Full-Body Split

     Here’s a way to use it on a “full body split” routine, where you do different exercises at each workout but you train both upper body lifts and lower body ones at each workout.  This is a great size-building program but one that gives your lifts more (and sometimes more adequate) rest than just doing the same full-body workout 3 days a week.

Monday:

Front squats: 5x4

Weighted dips: 3x5

Weighted chins: 5x3

Wednesday:

Deadlifts: 5x3

Push presses: 3x5

One-arm dumbbell rows: 3x5 (each arm)

Barbell curls: 5x3

Friday:

Back squats: 4x5

Incline barbell bench presses: 3x5

High pulls: 5x3

     When training in this manner, 3 days per week is probably plenty for most lifters, though feel free to add in a Saturday session of more different lifts if you feel as if you can handle it.  You can also alternate back and forth from week to week with 3 sessions and 4 sessions.  That’s a good way to cycle your training loads, following rule #4.

3-Way, Push/Pull/Legs Split

     Here is what a week of workouts might look like using the ever-popular push/pull/legs split.

Monday - Push:

Bench presses: 5x5

Incline dumbbell bench presses: 4x5

Military presses: 5x3

Weighted close-grip dips: 3x5

Tuesday - Pull:

Wide-grip weighted chins: 5x5

One-arm dumbbell rows: 4x5 (each arm)

Close-grip weighted chins: 5x3

Barbell curls: 5x3

Dumbbell curls: 3x5

Wednesday - Legs:

Back squats: 5x5

Front squats: 4x5

Snatch-grip deadlifts: 5x3

Stiff-legged deadlifts: 3x5

Friday - Push:

Weighted wide-grip dips: 5x5

Incline barbell bench presses: 4x5

Behind-the-neck presses: 3x5

Skull crusher/pullovers combo: 3x5

Saturday - Pull:

Barbell rows: 5x5

T-bar rows: 4x5

EZ-curl bar curls: 5x3

Thick-bar curls: 3x3

     Take off on Sunday, and on Monday do your next leg workout, training for a total of 5 days weekly if you keep the same M-TU-W-F-SA rotation.  Any weeks when you feel as if you need it, reduce the total days down to 4, or even 3 if you feel particularly drained.  Most weeks, however, on a 3-way split, I would try to get in 5 days of training.  That way, each week, two of the muscle groups get 2 workouts and the remaining muscle group gets just 1 session, but it rotates from week-to-week so that the once-weekly session only comes around every 3 weeks.  It’s another good way to ensure that you are cycling your training loads.

5-Way, One-Muscle Group-Per-Workout Split

     For anyone who likes to train with more volume and intensity, but less frequency, here’s the answer.

Monday - Chest:

Bench presses: 5x5

Incline barbell bench presses: 5x5

Flat dumbbell bench presses: 5x3

Weighted wide-grip dips: 5x3

Tuesday - Back:

Weighted wide-grip chins: 5x5

Barbell rows: 5x5

One-arm dumbbell rows: 5x5 (each arm)

Weighted close-grip chins: 4x5

T-bar rows: 4x5

Wednesday - Legs:

Back squats: 5x5

Front squats: 5x5

Barbell hack squats: 5x5

Snatch-grip deadlifts: 5x3

Thick-bar deadlifts: 5x3

Friday - Shoulders:

Military presses: 5x5

Push presses: 4x5 (Use the same weight as the military presses)

Dumbbell overhead presses: 5x5

One-arm dumbbell overhead presses: 5x5 (each arm)

Saturday - Arms:

Thick-bar barbell curls: 5x5

Barbell curls: 4x5

Dumbbell curls: 5x5

Weighted close-grip dips: 4x5

Skull crusher/pullovers combo: 5x5

     On average, you want to do more 5-set lifts instead of just 3 or 4 sets on a movement when training each muscle group only once per week.  But on any weeks when you feel particularly fatigued, drop down to just 3 sets for a lift.  Keep in mind that there’s, potentially, a big difference between 3 and 5 sets of 3 to 5 reps.  5 sets of 5 reps is 25 reps total but 3x3 is only 9.  Obviously, the 5x5 movements are going to be more taxing, which can be good or bad.  This kind of workout does require that you know your body well before undertaking it.  If you’re new(er) to training, stick with one of the other workout suggestions above.

Tips and Suggestions

  • These workouts work best for lifters who are at least at the “intermediate” stage or are naturally intuitive when it comes to their bodies.  It helps if you “know your body” so you’re not doing too much or too little at each training session.

  • Remember the 6th of the Russian rules, to treat your sessions as “skill training” and a “practice” with the lifts rather than the more common “workout” view.  This means that you should NOT be training all-out.  You should, on average, have several reps (a couple minimum) left “in the tank” at the end of a set.

  • When in doubt, start a lift with a lighter weight rather than a heavier one.  If it feels too light after a set or two, then add weight if needed.  Conversely, if you start with a weight and it feels too heavy, feel free to drop down in weight for the remainder of your sets on a lift.

  • Don’t have a pre-determined number of sets/reps in mind.  Do more or less based on how you feel once you start the session.

  • Some weeks you will train with heavier weights, and perhaps even break a personal best on a lift, and other weeks you will train with lighter weights.  This is only natural.  A mature lifter understands that gains in either strength or hypertrophy are not linear but ebb and flow.  If you stick with any kind of sub-maximal effort, grease-the-groove training for the long haul, however, you will reach a point where even your “light” weeks eventually surpass your “heavy” ones when you started.

  • Keep in mind that you have a wide range of set/rep options when you really think about it. They are: 3x3, 3x4, 3x5, 4x3, 4x4, 4x5, 5x3, 5x4,5x5.

     If you’re ever in doubt about what routine to utilize in your training, it’s always a good plan to get back-to-the-basics.  And one of the best ways to do that is with the 3 to 5 method.  It’s been around for decades because it works.  If you’ve never tried it before, perhaps it’s time to do so.  And if it’s been years since you last utilized it, maybe it’s time for a return.  The truly great workout systems never go out of style.  The 3 to 5 method is one of them.


     I hope you enjoyed this article.  If you like reading about programs for building size, strength, and power, then consider purchasing one of my books.  You can find out more information about all of my books that are currently available by clicking HERE.  Buying my books also helps to support my work and ensures that I can continue to hammer away at this blog.

     As always, if you have any comments or questions about the 3 to 5 method, please leave them in the “comments” section below or send me an email if you prefer private correspondence.  I’m glad to answer any questions that you might have.


Comments

Popular posts from this blog

The Deadlift Ultimate

AKA: The Last Deadlift Training Article You EVER Need to Read! Tips, Techniques, Tricks, Workout Routines, and Training Suggestions for Building Incredible Deadlift Strength and Power      Okay, maybe my “also known as” title here is a little, you know, over the top.  But as I sit here at my laptop, tapping away at these keys, my goal is (or at least make a valiant effort) to write the end-all, be-all article for building a monstrously strong and powerful deadlift.  I have the deadlift on my mind after penning my last few articles—a few on Anthony Ditillo’s training methods, another on a 3-day Russian training program, and my recent essay on an overview of Russian methods—because here’s the lowdown for the deadlift: while I love Ditillo’s training methods and Russian workout plans overall, I don’t necessarily think any of those methods are the best when it comes to the deadlift.  If you want to get really big and strong, plus build up your squat...

Bill Starr’s High-Volume, High-Frequency Training

Some Thoughts on High-Volume, High-Frequency Training, Bodyweight Workouts, Program Design, and Progressive Resistance      Bill Starr is primarily known for his 5x5 training and his heavy-light-medium system of strength training.  Most of the articles that I write here on Starr revolve around those methods, as well, including an entire book I wrote on his methodology, The Strongest Shall Always Survive: Lifting Lessons from an Iron Legend .  Starr was a one-time world-class Olympic weightlifter and a world-renowned strength coach.  When it came to the athletes that he trained, it was all about increasing their strength and performance.  But he also wrote a lot of articles for the major bodybuilding rags that ruled the magazine rack during his lifetime.  When I was young, for instance, I knew of him only because of his many articles in Ironman magazine and MuscleMag International .  Starr was well aware that most of those readers ...

Bench Big the Russian Way

High-Frequency, Grease-the-Groove Training for Building a Big Bench Press      When it comes to gaining size and strength, I don’t think there is any method better than one that uses high-volume, high-frequency training methods.  I first discovered just how powerful the Russian-style of training was for achieving this over 20 years ago.  At the time, I was dead-set on being the best powerlifter that I could be in the 181-pound class.  I could already squat and deadlift over 500 pounds, and I could bench press a little over three “wheels”—315 pounds.  I reached that level by using, at first, Bill Starr’s 5x5, heavy-light-medium system of training, and then a combination of it and Westside’s methods.  But I decided that if I was going to be capable of squatting and deadlifting more than 600 pounds, and bench pressing somewhere between 350 and 400, I needed to make some changes.  It was at that point that I decided to give the Sheiko...